Book Today!

From transporting a dish washer right into your home to attaching the water links, setting up a dish washer can use up to five hrs. It could take also longer if you do not have the right devices. To make your life less complicated as well as to avoid setting up a dish washer improperly, we recommend employing a professional plumber. A plumber will have the right devices accessible and also can install your new dishwashing machine in under two hrs. Keep reviewing to discover why you need to hire a plumber if you're not rather persuaded yet.

 

Not Installing Your Dishwasher Correctly Can Bring About a Mountain of Problems

Not just can mounting a dishwasher properly invalidate your service warranty, but it can likewise create a mess. As an example, if you do not mount the supply line correctly, you might manage leakages-- or perhaps worse, a flood. You could additionally experience a "water hammer"-- when the water runs also promptly with your pipelines and also triggers loud trembling audios. Last but not least, if you incorrectly install your dish washer to the garbage disposal, you may discover poignant scents or have deposit on your recipes.

 

An Improper Installation Can Nullify the Dishwasher's Warranty

Before mounting a dishwashing machine on your own, you should review the warranty very carefully. Unless you are useful and have experience setting up dishwashers, you must hire a plumber so you do not risk your warranty.

 

Installing a Dish Washer Calls For a Selection of Tools

If you do not have a variety of tools on hand, you might need to make a journey to Lowe's or Residence Depot. To install a dishwashing machine, you require the adhering to devices: pliers, a flexible wrench, a set of screwdrivers, a tube cutter, and opening saws.

 

A Plumber Can Inspect the Supply Lines

A supply line, specifically a dishwasher adapter, connects the dish washer to a water resource. A plumber can guarantee that the line is suitable with both your dishwasher as well as water resource if you acquire a new supply line. A professional plumber can examine it to guarantee that it's in good condition and also does not have any leakages if you determine to use an existing supply line.

 

A Plumber Can End Up the Task Affordably as well as Quickly

A plumber can mount your dish washer in one to 2 hours. The ordinary plumber won't bill more than a couple of hundred dollars to install your dishwasher.
From transporting a dish washer into your home to attaching the water links, installing a dish washer can take up to five hrs. To make your life less complicated and to stay clear of installing a dish washer improperly, we suggest hiring an expert plumber. A plumber will certainly have the right devices on hand as well as can install your brand-new dishwashing machine in under 2 hours. Unless you are handy as well as have experience installing dish washers, you should work with a plumber so you don't risk your guarantee.
A supply line, especially a dishwashing machine adapter, connects the dishwasher to a water source.

 

How To Install A Dishwasher

 

Installing A Dishwasher Yourself

 

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

 

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

 

Steps Involved In Dishwasher Installation

 

Step One: Gather the Necessary Supplies

 

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

 

• A screwdriver


• • A hose clamp


• • Duct tape (optional)


• • A brass fitting


• • Teflon tape


• • A pair of pliers


• • An adjustable wrench


• • A drill


• • Braided steel water line


• • A pair of rubber hand gloves (optional)


• • Wire nuts

 

Step Two: Take Safety Measures

 

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

 

Step Three: Remove the Old Dishwasher

 

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

 

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

 

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

 

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

 

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

 

Step Four: Install the New Dishwasher

 

Connect the Water Supply

 

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

 

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

 

Attach the Drain Line

 

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

 

Slide the Dishwasher into Place

 

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

 

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

Schedule Your Job Now